85
Data Processor
Measurement
Basic Operating Procedure Flow
Measurement
White Calibration (P.86)
Measuring absolute value Measuring color difference value
Absolute Measurement (P.88)
Measuring the Color Difference
1) Setting a new color
difference target color
before every
measurement (P.98)
2) Selecting a pre-existing
color difference target
color before
measurement (P.102)
Setting the Color Difference Target Color
1) Measuring a specimen
and setting the data as
the color difference
target color (P.90)
2) Using the keys to set the
color difference target
color (P.93)
To Next Page
Loading...
