95
Data Processor
Measurement
5
Set the color difference target color data using the
key and numeric pad.
Input range: 0.01 ≤ X, Y, Z ≤ 160
[Example]
Setting L*=60.72, a* = +10.32, and b* = +12.21 to color dif-
ference target color number T00 should be input as right.
For L*a*b* or Hunter Lab, the symbols for a* and b* or a and b are changed using the Symbol
key when the cursor is at the data position for a* and b* or a and b. The cursor does not move
to the symbols position for a* and b* or a and b.
6
Once data is set, press the Measure/Enter key
.
• A color difference target color is set.
• When not setting a new color difference target color, measur-
ing overwrites the color difference target color data.
7
Once settings are complete, set the color difference
target color name using the key and the numeric
pad.
(How to set the color difference target color name)
1) Select input mode using the key.
• Pressing the key changes the input modes in the following order: upper case Latin
letters → numbers → lower case Latin letters.
2) Move the cursor using the key and input the color difference target color name using
the numeric pad.
• The name is up to 9 characters (see P.20 “As input keys” for details.)
8
Once settings are complete, press the Measure/Enter key
.
• Settings are complete, complete sound beeps and the display returns to the measurement screen.
Settings are now finished. Other color difference target color numbers can be set by repeating the
above procedure.
Setting screen
Setting the color difference
target color name (example)
Setting screen
［ＴＡＲＧＥＴ］
◎ＴＡＲＧＥＴ ＶＡＬＵＥ
Ｌ＊＝
ａ＊＝＋１０．３２
ｂ＊＝＋１２．２１
◎ＴＡＲＧＥＴ ＮＡＭＥ Ａ
Ｔ０２
Ｐ００
C
P
［０００１］
６０．７２
［ＴＡＲＧＥＴ］
◎ＴＡＲＧＥＴ ＶＡＬＵＥ
Ｌ＊＝
ａ＊＝＋１０．３２
ｂ＊＝＋１２．２１
◎ＴＡＲＧＥＴ ＮＡＭＥ Ａ
Ｔ０２
ＤＩＳＰ． ＬＩＳＴ：［Ｅｓｃ］
Ｐ００
C
P
［０００１］
６０．７２
［ＴＡＲＧＥＴ］
◎ＴＡＲＧＥＴ ＶＡＬＵＥ
Ｌ＊＝ ６０．７２
ａ＊＝＋１０．３２
ｂ＊＝＋１２．２１
◎ＴＡＲＧＥＴ ＮＡＭＥ Ａ
ＭＩＮＯＬＴＡ
Ｐ００
C
P
［０００１］
To Next Page
Loading...
