Minolta Di152 - 3 Misfeed Troubleshooting Procedures; Misfeed at Copier Paper Take-Up J01 and Misfeed at Bypass Tray J06

FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING
01.09.04
T-7
3. MISFEED TROUBLESHOOTING PROCEDURES
3-1. Misfeed at Copier Paper Take-Up J01 and Misfeed at Bypass
Tray J06
Misfeed at 1st Tray J01 Troubleshooting Procedures
Relevant Electrical Parts
Synchronizing Roller Sensor (PC1)
Manual Feed Paper Sensor (PC2)
Paper Take-Up Solenoid (SL1)
Manual Bypass Solenoid (SL2)
Multiple Bypass Solenoid (SL21)
Master Board (PWB-A)
Step Check Result Action
1 Paper meets product specifications. NO • Change paper.
2 Paper is curled, wavy, or damp. YES • Change paper.
• Instruct user to load paper that
meets product specifications.
3 Edge Guide and Trailing Edge Stop
are at correct position to accommo-
date paper.
NO • Adjust as necessary.
CN26
PC1 ANODE
Multiple Bypass
MANUAL BYPASS SECTION
DRAWER SECTION
TRANSPORT SECTION
Multiple
Bypass Solenoid
Manual Feed
Bypass Solenoid
Paper Take-Up
Solenoid
Synchronizing
Roller Senser
Manual Feed
Paper Senser
PWB-A
Master Board
4022T522AA