FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-43
4. Unplug two connectors.
5. Remove four screws and the Multiple Bypass.
<<Multiple Bypass Installation Procedure>>
➀
Temporarily secure the Multiple Bypass using four
screws.
➁
Install the positioning pin at the location shown in
the illustration.
(Use the positioning pin furnished as an acces-
sory with the Multiple Bypass.)
➂
Close the Right Door and correctly position the
Multiple Bypass using the positioning pin.
➃
Tighten the four Multiple Bypass mounting screws
to specified torque.
To Next Page
Loading...
