FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-68
4-6. MISCELLANEOUS
(1) Remounting the EEPROM (U29)
NOTE
• When the Control Board (PWB-C) is replaced with a new one, EEPROM (U29) must be
demounted from the old PWB-C and remounted on the new PWB-C.
Remove the EEPROM (U29) from the new Control Board and mount the EEPROM (U29) of
the old Control Board to the new Control Board.
New EEPROM Old EEPROM
New Control Board Old Control Board
4022D031AA
NOTE
• Note the alignment notch marked with A on the
EEPROM (U29) when mounting the IC.
1171D049AA
A
A
To Next Page
Loading...
