Minolta Di152 - Toner Replenisher (Auxiliary Toner Replenishing)

Using the Utility Mode
7
Di152/Di183 7-13
7.3 Toner Replenisher (Auxiliary Toner Replenishing)
The copier tends to exhaust the supply of toner rapidly when making a
number of copies from an original with dark solid areas, such as a photo.
As a result, the image density of the copy will become lighter. In such a
case, you can use Toner Replenisher to quickly restore the normal image
density.
✎
Note
Do not turn OFF the Power Switch or open the Front Cover while the
copier is replenishing toner.
Toner will not be replenished if the image density is sufficiently high.
The toner replenisher sequence ends automatically.
Running the Toner Replenisher Sequence
1
Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2
Making sure that “U--” appears on
the Display, enter “3” from the 10-
Key Pad.
3
Press the [Start] key.