Using the Utility Mode
7
Di152/Di183 7-23
Total Counter Display by Account Procedure (A-5)
1
Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2
Making sure that “Ad-” appears on
the Display, enter “1” from the 10-
Key Pad.
3
Press the [Start] key.
4
Making sure that “A--” appears on
the Display, enter “5” from the 10-
Key Pad.
5
Press the [Start] key.
6
Press [ ] or [ ] key to select the
account number for which you want
to check the Total Counter value.
7
Press the [Start] key.
To Next Page
Loading...
