Making Copies
5
Di152/Di183 5-19
3
Make any other necessary settings.
❍
Paper (p.5-3)
❍
Zoom Ratio (p.5-11)
❍
Image Density (p.5-16)
4
Enter the number of copies to be made from the 10-Key Pad and then
press the [Start] key.
This will start the interrupt copy cycle.
5
After the interrupt copy has been made, press the [Interrupt] key:
The Interrupt indicator will go out and the settings will be recovered for
the interrupted copy job.
6
Reposition the original for the interrupted copy job that has been
removed in step 2.
7
Press the [Start] key.
The interrupted copy job will be resumed.
To Next Page
Loading...
