1.3 Explanation of Basic Concepts and Symbols
1
Di1611/Di2011 1-5
Introduction Chapter 1
“Width” and “Length”
Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as “X” in the illustration) and the
second to the length (shown as “Y”).
Paper Orientation
Lengthwise ( )
If the width (X) of the paper is shorter than
the length (Y), the paper has a vertical or
portrait orientation, indicated by either “L”
or .
Crosswise ( )
If the width (X) of the paper is longer than
the length (Y), the paper has a horizontal
or landscape orientation, indicated by
either “C” or .
To Next Page
Loading...
