Minolta Di251 - Page 151

Customizing Your Copy
4
Di251/Di351 4-49
5
Set the file margin width of the
originals.
6
Confirm your settings with [ENTER].
The Original>Copy settings are
shown again.
Ü If necessary, make additional copier settings. Start the copy cycle by
touching [START].
.
Combining file margin settings!
Settings: file margin left,
file margin width 0mm
Result:
The 2nd original will be printed in
the same direction as the
1st original.
Settings: file margin above,
file margin width 0mm
Result:
The 2nd original will be printed in
the opposite direction to the
1st original.