Getting to Know Your Copier
2
Di251/Di351 2-27
2.4 Transporting the Copier
If you need to transport the copier, please consult your technical
representative.
2.5 Setting up the Copier
Environmental Requirements
The optimal environmental requirements of the copier are as follows.
l Temperature from 10°Cto32°C
(maximum fluctuation of 10°C per hour)
l Humidity of 15% to 85%
(maximum fluctuation of 10% per hour).
Installation Site
The installation site must meet the following requirements:
l An area that is dry and free of dust
l A level surface free of undue vibrations
l Free from flammable gases such as ammonia
l Provision for good ventilation
l A location away from curtains or other easily ignited materials
l Away from personnel so that no one is subjected to the direct exhaust
air of the copier.
The unit must be protected from the following influences:
l Splashing liquids
l Direct sunlight
l Strong temperature fluctuations
l Direct airflow from heating or air conditioning units.
To Next Page
Loading...
