I-44Di251/Di351 Rev. 1.1.0.0/03.01
left
1.8.11 Adjusting the Document Stop Position
1. Access the initial Tech. Rep. Mode screen.
(Refer to the Service Manual for the
procedure.)
2. Touch “Tech. Rep. Choice”.
3. Touch “ADFR”.
4. Touch “Original Stop Position”.
5. Select the “Single Feed Set” mode.
6. After pressing the Clear key, use the key pad
to enter the adjustment.
Use the * key to switch between + and -.
+: Adjusts in direction C
-: Adjusts in direction D
Level History
To Next Page
Loading...
