Minolta Di251 - Unpacking the Finisher

I-49 Di251/Di351Rev. 11..0.0/03.01
right
1.9.1 Unpacking the Finisher
1. Remove the finisher from its box, and then check that the following accessories
are also enclosed.
1. Rail guide ....................................................................1
2. Rail ..............................................................................1
3. Stabilizing pin ..............................................................1
4. Magnet ........................................................................1
5. Horizontal transport unit ..............................................1
6. Horizontal transport unit mounting base......................1
7. Tray .............................................................................1
8. Protective guide...........................................................1
9. Labels..........................................................................2
10. Screws.........................................................................3
11. Setup instructions (this manual) ..................................1
1
2
3
4
5
6
7
8
9
10