I-78Di251/Di351 Rev. 1.1.0.0/03.01
left
1.12.3 Connecting the Paper Feed Unit to the Copier
1. Remove the connector cover from the copier.
2. Remove the rear Cover from the Paper Feed
Unit.
3. Remove the bracket from the Paper Feed
Unit.
(for Di251 and Di351)
4. Connect the Harness furnished with the
Paper Feed Unit to the copier and the Paper
Feed Unit.
NOTE
Push the Harness into a recess in the rear as
illustrated to ensure easy and proper installation
of the Bracket in the subsequent step.
To Next Page
Loading...
