Minolta Di251 - Page 250

FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-7
3-3. Settings in the Utility Mode
(1) User’s Choice Mode
• User’s Choice is used to make various settings according to the user’s need.
1. User's Choice Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the “User’s Choice” key.
3. Select the appropriate screen from the menu.
4. Select the appropriate function.
5. After the settings are complete, touch the “Enter” key to validate the settings.
<Exiting the Mode>
• Touch the “Exit” key.
Touch Panel
Display
Setting
User’sChoice User’s Choice is used to make various settings according to the user’s
need.
Meter Count Displays the counts of various counters.
Copy Job Recall Permits programming of various functions, including copying jobs.
User Management Permits setting of the various User Management functions.
Admin.
Management
The entry of the “Administrator #” set using the Tech. Rep. mode per-
mits the settings of the following functions.