FrameMaker Ver.5.5(PC) Di251/Di351 TROUBLESHOOTING
05.03.01
T- 5 5
(8) Void Areas
Section Step Check Result Action
Engine
1 PC Drum is dirty. YES Clean.
2 Image Transfer Roller is dented or
scratchy.
NO Change.
3 Fusing Rollers are scratchy or
deformed.
YES Clean or change.
NO Change I/C.
Change Master Board.
IR
1 Original Glass is dirty. YES Clean.
2 CCD2 Board and MFB2 Board are
connected properly.
NO Correct.
3 MFB2 Board and Master Board are
connected properly.
YES Change CCD Unit.
Change MFB2 Board.
NO Correct.
<Typical Faulty Images>
4011T523AA
To Next Page
Loading...
