Minolta Di251 - 15 Manual Bypass Tray; Manual Bypass Paper Take-Up Control; Manual Bypass Paper Empty Detection

FrameMaker Ver5.5E(PC)Di251/Di351 MECHANICAL/ELECTRICAL
05.03.01
M-36
15. MANUAL BYPASS TRAY
15-1. Manual Bypass Paper Take-Up Control
• Drive from the Main Motor is transmitted via a gear train to the Manual Feed Paper Take-
Up Roll when the Manual Feed Paper Take-Up Clutch is energized.
15-2. Manual Bypass Paper Empty Detection
• The Manual Feed Paper Take-Up Sensor is used for detecting a paper-empty condition
of the Manual Bypass Tray.
Electrical Component Control Signal Energized Deenergized Wiring Diagram
CL2 PJ2A-9A L H 4-I
Electrical Component Control Signal Activated Deactivated Wiring Diagram
PC8 PJ2A-7B L H 4-H
4011M023AB
Main Motor M2
Manual Feed Paper Take-Up Roll
Manual Feed Paper Take-Up Sensor PC8
Manual Bypass Tray
Manual Feed Paper Take-Up Clutch CL2
1167M086AA 1167M085AA
When Paper is Present When Paper is not Present
Manual Feed Paper
Take-Up Sensor PC8