FrameMaker Ver5.5E(PC) Di251/Di351 MECHANICAL/ELECTRICAL
.05.03.01
M-41
19. ERASE LAMP
• Any potential remaining on the surface of the PC Drum is neutralized by both light from
the Erase Lamp and a negative voltage applied by the Charge Neutralizing Sheet.
• The Charge Neutralizing Sheet applies a negative charge on the surface of the PC Drum
which is positively charged by the Image Transfer Roller. The Erase Lamp then illumi-
nates the surface of the PC Drum to further neutralize it.
Electrical Component Control Signal All lamps ON Standby ON Wiring Diagram
LA1 PJ10A-7 L H 8-F
1171M009AD
EraseLampLA1
I/C
PC Drum
1171M010AD
PC Drum
PC Drum Charge Corona
Sleeve/Magnet Roller
Erase Lamp (LA1)
Charge Neutralizing Sheet
Cleaning Blade
To Next Page
Loading...
