FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-6
No. Part Name Removal Procedure
25 Toner Bottle Cover Open the Toner Bottle Cover.
→
Unhook the dowels at four
places of the Toner Bottle Cover.
26 Harness Cover Remove one screw that secure the Harness Cover.
27 Duplex Unit Rear
Cover
Remove No. 31.
→
Remove two screws that secure the
Duplex Unit Rear Cover.
28 500-Sheet Cas-
sette Side Cover
Open the Side Cover.
→
Slide the Side Cover to the front and,
at the same time, pull the rear side out of the frame.
29 Manual Bypass
Tray
Remove No. 26.
→
Unplug one connector.
→
Remove three
screws that secure the Manual Bypass Tray.
30 Side Cover
31 Duplex Unit Remove two screws that secure the Duplex Unit.
32 Fusing Unit See D-26.
33 Front Inside Cover Remove No. 8.
→
Remove No. 32.
→
Remove two screws that
secure the Front Inside Cover.
34 Right IR Cover Remove three screws that secure the Right IR Cover.
To Next Page
Loading...
