FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
T-10
The following warning screen appears after a misfeed display has been reset if the actual
size of the paper loaded in a paper source differs from the paper size set for that particular
paper source.
✽
1st to 5th Drawer:A size error is indicated by a highlighted paper source in the copier
overview display. (In the above example, there is a size error in the
2nd Drawer.)
<Resetting the Size Error Display>
Slide out the drawer, then slide it back in, or load paper in the Manual Bypass Tray.
<Causes of a Size Error>
•
Wrong paper size settings have been made.
•
The user loads paper of a size different from what is set for the paper source.
•
Two or more sheets of paper are being taken up and fed in.
3-2. Size Error
1171T009CA
[1st to 5th Drawer] [Manual Bypass]
1171T010CA
To Next Page
Loading...
