Minolta Di350 - Drive Mechanism; Fusing Rollers Pressure Mechanism

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-45
1171SBM1901A
•
Drive from the Main Motor is transmitted via a gear train to the Right Fusing Roller.
1171SBM1902A
•
To ensure that there is a certain width of area of contact between the Left and Right Fus-
ing Rollers, pressure springs are installed.
•
The rollers are held pressed against each other at all times and they are released only
when servicing the copier or replacing parts.
•
The pressure between the two rollers is approx. 17 kg.
•
The rollers can be released by moving the Fusing Misfeed Clearing Lever in the direction
of the arrow.
19-1. Drive Mechanism
Electrical Component Control Signal ON OFF
M2 PJ16A-1 L H
19-2. Fusing Rollers Pressure Mechanism
1167M057AB
Right Fusing Roller
Paper Exit Roller
Main Motor (M2)
Fusing Misfeed Clearing Lever
Pressure Spring
1167M077AF