Minolta Di350 - UN1 (Control Panel; PWB-L (PPM Switching Board

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-6
3-3. UN1 (Control Panel)
Symbol Name Description
SW37 Warm Restart Switch
•
Used to enter the initial mode.
•
Used to restart the copier after a breakdown.
3-4. PWB-L (PPM Switching Board)
Symbol Name Description
S1 Low-Speed Mode
Selecting Switch
Used to make longer the paper-to-paper intervals as
a means of preventing the problem in which sheets of
paper are fed out untidily when large size paper left to
stand under high humidity condition is being used.
✽
Keep this switch in the H position, as it is only for
special users.
1167S018AA
SW37
1167S018AA
1167S026AB
SW1
SW1 H L
1167S026AB