D-111
4-2. MOUNTING THE ORIGINAL SIZE DETECTING SENSORS
(OPTION)
NOTE
When an Original Size Detecting Sensor has been added, turn “ON” “Original Size Detect-
ing Option” of “System Input” under the Tech. Rep. mode and make the “Orig. Size Adjust-
ment.”
☞ D-80
1. Remove the Original Glass and EDH Glass.
2. Install the Original Size Detecting Sensor.
✽ 1: Standard for the Except U.S.A., Canada
✽ 2: Standard for the Other Areas (Except Korea, Taiwan)
✽ 3: Mount the sensor in hole D for Korea and Taiwan.
Mount it in hole E for areas other than Korea and Taiwan.
4002D268AB
FD3 (✽2)
FD1 (✽1)
CD2 (✽2)
(✽3)
A
G
To Next Page
Loading...
