Minolta DI450 - Using Basic Copying Functions

D-26
(10) Cleaning of the Upper Synchronizing Roller
(11) Removal of the Lower Synchronizing Roller
14. Snap off the E-ring and remove the bushing from
the front end of the Upper Synchronizing Roller.
15. Remove the Upper Synchronizing Roller.
4002D076AB
1. Swing down the Front Door and slide out the
Developing Unit.
2. Using a brush or a vacuum cleaner, clean the
Upper Synchronizing Roller.
4002D080AB
1. Remove the Suction Unit.
2. Unhook the spring, snap off the E-ring, and remove
the bushing from the front end of the Lower Syn-
chronizing Roller.
4002D077AC
3. Unhook the spring, snap off the E-ring, and remove
the gear and bushing from the rear end of the
Lower Synchronizing Roller.
4002D078AC
4. Remove the Lower Synchronizing Roller.
4002D079AC