D-36
(10) Winding of the Scanner Drive Cable
9. Remove one screw and the slide the rear pulley
and bushing toward the front.
4002D113AA
10. Remove the Scanner Drive Gear, pulleys and
bushings at the front and rear, and the shaft.
4002D114AD
4002D001AA
Pulley C
Pulley B
Pulley F
Pulley A
Pulley E
Pulley D
1. Position the round bead of the Scanner Drive
Cable in the pulley as shown.
NOTE
Make sure that the bead snugly rests in the slit in the
pulley.
Front
4002D002AA
Bead
To Next Page
Loading...
