Minolta DI450 - Page 58

D-39
13. Slide the rear pulley and bushing to the rear and
secure install one mounting screw.
4002D118AD
14. Wind the bead end of the cable around pulley C
and pulley B, then hook the bead onto the Adjust-
able Anchor.
Front
4002D008AA
Pulley C
Pulley B
15. Wind the hook end of the cable around pulley A
and pulley B.
4002D009AA
Pulley B
Pulley A
16. Fit the hook end of the cable into the groove in the
Cable Guide and hook the spring.
4002D119AB
Cable Guide
17. Wind the bead end of the cable around pulley F
and pulley E, then hook the bead onto the Adjust-
able Anchor.
Rear
4002D010AA
Pulley F
Pulley E