D-44
(2) Cleaning of the Developer Scattering Prevention Plate
(3) Cleaning of the DS Positioning Collars
(4) Cleaning of the Toner Antispill Trap
(5) Replacement of the Cleaning Blade
1. Using a brush, whisk dust off the Developer Scat-
tering Prevention Plate.
4002D129AA
1. Using a brush or a soft cloth dampened with alco-
hol, clean the DS Positioning Collars.
1136D177AA
1. Using a brush or a soft cloth, clean the Toner Anti-
spill Trap.
4002D130AA
1. Remove two screws and the Cleaning Blade, and
replace the Cleaning Blade with a new one.
4002D127AB
To Next Page
Loading...
