D-46
(6) Replacement of the Developer
7. Apply a thin coat of toner to the surface of the PC
Drum.
4002U023AB
8. Holding onto the both sides of the PC Drum with
hands, turn the PC Drum a half turn in the direction
of the arrow.
4002U024AC
9. Holding onto the both sides of the PC Drum with
hands, turn the PC Drum a half turn in the direction
of the arrow.
4002U025AC
1. Remove the Sub Hopper Unit.
2. Dump the developer out the Developing Unit.
4002D126AA
To Next Page
Loading...
