D-50
2-7. PC DRUM CHARGE CORONA AND IMAGE TRANSFER/
PAPER SEPARATOR CORONAS
(1) Removal of the PC Drum Charge Corona
(2) Cleaning of the PC Drum Charge Corona Housing
1. Swing down the Front Door and slide out the
Developing Unit.
2. Move the PC Drum Charge Corona to the rear,
raise it, and take it off.
4002U015AA
1. Remove the PC Drum Charge Corona.
2. Press the Mesh Holder on the front of the Corona
Unit in the direction of arrow A to remove the Grid
Mesh.
1156D070AA
3. Remove the Cleaning Pad Holder.
4. Remove the End Caps from the front and rear ends
of the Unit.
4002D146AB
5. Remove the Comb Electrode.
NOTES
• Use care not to deform the Comb Electrode.
• When removing the electrode, first snap off its spring
end.
1139D176AA
To Next Page
Loading...
