D-65
(14) Removal of the Misfeed Removal Knob Bushing
(15) Removal of the Fusing Unit Drive Coupling Gear
2-9. TURNOVER UNIT
(1) Cleaning of the Turnover Roller, Transport Rollers
1. Slide out the Fusing Unit.
2. Remove one E-ring and the gear and bearing.
4002D193AC
3. Remove the Misfeed Removal Knob Assy. and
bushing.
4002D194AB
1. Slide out the Fusing Unit.
2. Remove one E-ring and the Fusing Unit Drive Cou-
pling Gear.
4002D248AC
1. Open the Lower Left Door.
2. Using a soft cloth dampened with alcohol, wipe
clean the Turnover Roller, Transport Rollers.
4002D195AC
To Next Page
Loading...
