D-69
(2) Adjustment of Front Door Interlock Switch
1. Swing down the Front Door.
2. Remove the Left Cover.
3. Slide out the Fusing Unit.
4. Remove four screws and the Cover.
NOTE
Do not remove the belt mounting screw on the cover.
4002D196AC
5. Loosen two screws that secure Front Door Inter-
lock Switch.
4002D197AB
6. If the interlock switch is OFF when the Front Door
is closed in position, move the interlock switch
toward the front.
7. If it is impossible to close the Front Door in position
because of the interlock switch located excessively
to the front, move the switch to the rear.
4002D198AC
8. After the Interlock Switch is moved, tighten two
mounting screws.
9. Check the Interlock Switch ON/OFF by closing and
opening the Front Door.
Reference
An NO type switch is used for the Interlock Switch.
4002D199AB
To Next Page
Loading...
