3-18
4. Selecting the Zoom
Making Copies
Chapter 3
<Same ratio for X and Y>
Touch [Custom Zoom].
Touch [Input].
Enter the zoom ratio from the 10-Key Pad.
Useful Tips
Example:
×
1.300
Press 1, 3, 0, and 0, in that order, from the 10-
Key Pad.
• To correct a ratio, press the Clear key and then
enter the correct one again.
• The zoom ratio can be set in the range
×
0.250
to
×
4.000 when the copy is made through the
Original Glass and
×
0.250 to
×
2.000 when the
Electronic Document Handler is used.
Touch memory location key [1] or [2], or
[Minimal], whichever is desired.
* When the key is touched, the ratio is shown
on the key, indicating that it has been stored
in memory, except for [Minimal].
NOTES
• When a new ratio is stored, the old one is
erased.
• The [Minimal] ratio can range between
×
0.900
and
×
0.999.
• When the Hard Disk Drive Kit is mounted and
“100 Accounts” is selected for “Copy Track”
of “Administrator Mode” available from Utility
Mode, zoom ratios can be stored in memory for
each account.
Touch [Enter].
Storing a Ratio in Memory
1
4003P320EA
2
4003P025CA
3
123
456
789
0C
1139O4870A
1149O160BA
4
4003P026CA
5
To Next Page
Loading...
