3-28
5. Selecting the Finishing
Making Copies
Chapter 3
<Only when the Finisher FN-5 is mounted>
<Crease>
Crease makes a crease in the copy at its center
before it is fed out.
<For United States and Canada Users>
Sizes of paper that can be loaded:
11×17 L, Letter L
<Except United States and Canada Users>
Sizes of paper that can be loaded:
11×17 L, Legal L, Letter L
Width 8-1/4 to 11-3/4
Length11to17
Make sure to select the correct stapling function
when making copies with the Crease function if
you want to make a stapled copy set.
Number of sheets : 2 to 15
NOTE
Even if Staple is previously set to a corner or side position, the setting of Crease automatically cancels
this setting and reselects a center stapling position.
Touch the desired finishing function key and
then touch [Folding].
Touch [Crease].
Touch [2-Point Staple].
Touch [Enter].
Folding
1155O039AA
1155O040AA
1
4003P039CA
2
4003P040CA
3
4003P341EA
4
To Next Page
Loading...
