Minolta DI450 - Selecting the Density Image Density

3-44
Making Copies
Chapter 3
7. Selecting the Density
Image Density
When you touch [Density] on the Touch Panel, a screen appears that allows you to set the exposure level
for the image density.
Density offers a choice of [Text], [Text/Photo], or [Photo]. Select one according to your needs.
Useful Tips
• Touching [Auto] automatically selects [Text].
• The machine has been factory-set to automatically select the Auto Exposure mode. User’s Choice can
be used to change this default setting to the Manual Exposure mode.
☞
p.5-14
Text emphasizes outlines to produce clear-cut text
as it appears on the copy.
<Auto Exposure>
When in the Auto Exposure mode, the machine
automatically adjusts the exposure level for the
optimum copy image density.
Touch [Text].
Touch [Auto].
[Auto] is highlighted, indicating that the
machine is set into the Auto Exposure mode.
Useful Tip
The exposure level in the Auto Exposure mode
can be made either “Darker” or “Lighter” by
using User’s Choice.
☞
p.5-14
<Manual Exposure>
In the Manual Exposure mode, you can vary the
exposure level in nine steps.
Touch [Text].
Touch [Lighter] or [Darker] as necessary.
Useful Tips
• To make the image darker, touch [Darker].
• To make the image lighter, touch [Lighter].
4003P003CA
Text
1
2
4003P003CA
1
2
4003P068CA