Minolta Dimage Scan Speed - Page 11

Dimâge Scan Speed 11
Terminating the SCSI chain
helps to suppress electronic
noise in the SCSI chain.
Not terminating the SCSI chain
can cause slowdowns, data
errors, crashes, and other
unpredictable errors.
5. Plug the power cord into the scanner’s AC
socket, then plug it into a grounded outlet.
4. Turn the terminator power switch (switch 4) to
ON.
• An external terminator is not necessary with this
scanner.
If the Dimâge Scan Speed is the last or
only device in your SCSI chain…
CONNECTING THE HARDWARE