left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER3.GB Page 22 of 26
Text produced for: User Manual EP1030/1030F first page in draft 11
3.4 Setting Image Density
EP1030/EP1030F 22 Rev. 1.x/22.05.02
3.4 Setting Image Density
The Exposure Control Keys 456 can be used to adjust the image
density of the copy. Selection can be made between auto exposure mode
and manual exposure mode to meet specific needs.
Auto Exposure Mode
The copier reads the image density of the original and automatically
adjusts the exposure level for optimum copy image density.
1
Press the 5 Key and the "A" will
light up.
Each time the 5 Key is
pressed, it will switch between
auto exposure mode and
manual exposure mode.
USEFUL TIP
The auto exposure mode automatically sets the copier for the best
copy image density.
The inital setting is auto exposure mode.
To Next Page
Loading...
