right
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER4.GB Page 29 of 38
Text produced for: User Manual EP1030/1030F first page in draft 19
4.1 Toner Replenisher
Rev. 1.x/22.05.02 29 EP1030/EP1030F
Chapter 4
3
While the Toner is being
replenished, the LEDs at the
bottom of the Display Panel will
light up one at a time in the
clockwise direction.
4
Press the Clear/Stop Key to
stop the Toner Replenishing
mode.
NOTE
Copying cannot be performed while the Toner is being replenished. If
copying must be performed, stop the Toner Replenishing mode with
the Clear/Stop Key and then start copying.
The copier cannot enter the Toner Replenisher mode under the
following conditions: the starter is being refilled, and the indicators
show that an error or paper misfeeds has occurred.
To Next Page
Loading...
