Minolta EP1030 - Semi-Automatic Document Handler (SDH) Specs

left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER4.GB Page 36 of 38
Text produced for: User Manual EP1030/1030F first page in draft 19
4.5 Default Auto Exposure Level Adjustment
EP1030/EP1030F 36 Rev. 1.x/22.05.02
4.5 Default Auto Exposure Level Adjustment
The density level for the Default Auto Exposure Level Adjustment can be
set to one of nine settings. With copy density 5 as the middle setting,
decreasing the setting value lightens the density and increasing the
setting value darkens the density.
1
Use the main switch to turn off
the copier. While holding down
the Exposure Control Key 5,
turn on the copier.
2
Press the Exposure Control Key
5 again. The copier enters the
Default Auto Exposure Level
Adjustment.
Copy density 1 (lightest)
Copy density 2 (lighter)
Copy density 3 (lighter)
Copy density 4 (lighter)
Copy density 5 - middle setting
Copy density 6 (darker)
Copy density 7 (darker)
Copy density 8 (darker)
Copy density 9 (darkest)