Minolta EP1030 - Image Erase Lamp Functionality

right
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER5.GB Page 49 of 60
Text produced for: User Manual EP1030/1030F first page in draft 27
5.4 B Imaging Unit Indicator
Rev. 1.x/22.05.02 49 EP1030/EP1030F
Chapter 5
5
With starter supply port facing
upward, insert the starter
cartridge into the cartridge
holder in the direction a shown
on the cartridge.
NOTE
Use care not to install the toner cartridge.
6
Remove the seal from the
starter cartridge and close the
cartridge holder.
7
Align the imaging unit with the
rails in the copier. Push until a
locking sound is heard.
8
NOTE
Do not touch or scratch the PC Drum.