left
Module: Q:\Products\Minolta\e\EP1030\OM\00-gb\Gb\CHAPTER5.GB Page 50 of 60
Text produced for: User Manual EP1030/1030F first page in draft 27
5.4 B Imaging Unit Indicator
EP1030/EP1030F 50 Rev. 1.x/22.05.02
9
Pushontheareamarked"h "to
lower and lock the upper unit.
The Front Door can now be
closed.
10
Plug in the power cord and turn the Main Switch on.
11
After a moment, a "0" will be
displayed for about 6 min.
indicating that charging is taking
place. A"1" indicatesthat starter
charging has been completed.
12
If the display alternates between
"E" and "1", it is probably
because the seal was not
removed from the starter
cartridge. Remove the seal and
restart the process by turning
the copier off and on again.If the
display alternates between "E"
and "2", call your service
representative.
13
or
To Next Page
Loading...
