1076D131
3. Using a soft cloth dampened with alcohol, clean the
Lamp by wiping its surface gently in one direction.
When reinstalling the Lamp, use care not to allow the
protruding navel of the Lamp to hit against the Lamp
Reflector and that the protruding navel points toward
the opening in the Lamp Reflector.
NOTE
(7) Cleaning of the 1st/2nd/3rd Mirrors
1. Turn the Scanner Drive Gear to move the Scanner
away from the Mirrors. Then, wipe clean the
1st/2nd/3rd Mirrors with a soft cloth.
An alcohol-dampened cloth may be used if the Mirror
is seriously contaminated.
NOTE
(8) Cleaning of the Lens and 4th Mirror
1. Gently dust off the surface of the Lens and 4th Mirror
by using a dry soft cloth.
An alcohol-dampened cloth may be used if the Lens
or Mirror is seriously contaminated.
NOTE
(9) Cleaning of the Optical Section Cooling Fan Filter
1. Unhook the Fan Cover at the bottom by slightly raising
and, at the same time pulling, the two catches on the
bottom.
2. Clean the Filter with a brush or a vacuum cleaner.
D-26
To Next Page
Loading...
