(8) Adjustment of the Paper Lifting Plate Springs (2nd Drawer)
◆Important
•
When the paper size loaded in the 2nd Drawer has been changed, be sure to replace the
Springs by referring to the Table given below. (For replacement of the Springs, see p. D-13.)
•
When the Springs have been replaced, change the position of the 2nd Drawer Paper Take-Up
Roll by referring to the Table given below. (For disassembly of the Paper Take-Up Roll Unit, see
p. D-11.)
•
The Springs for replacement can be found on the underside of the 2nd Drawer.
[Roll Positions]
123456
1139D029AA
Positions of 2nd Drawer Spring Installation 2nd
Drawer
Paper
Take-Up
Roll
Position
NO
2nd Drawer
Paper Size
Indication
SP1. 1~9
SP2. 10~14
SP2.
12~24
SP1. 6~9
SP2. 10~11
SP1. 2~5 SP1. 1
1A3/A4
SP Silver
SP Silver 6
211 × 17 ⋅ LTR.
SP Silver
5
3G.LTR 5
4B4/B5 4
5254 4
6
SP Silver
3
7FLS. 3
8LTR. 3
9A4 3
10 FLS.
SP Gold
SP Gold
2
11 B5 2
12
SP Gold
1
13 A5 1
14 INV. 1
Edge Guide
D-56
To Next Page
Loading...
