Minolta EP1080 - System Panel

8-2. System Panel
Meter
Count
Toner
Drum
Dehumidify
Input
Auto
Size
Margin
Job
Memory
Cover
Manual
Staple
Sort
Sort &
Staple
Group
1
Mixed Orig. Det.
2
21
22
11
2in1
12
2in1
Book
1
Book
Orig. CopyFinishing
2
1139O2372A
13
12
11
1 2
3
4
5 6 7 8 9
10
1
Auto Size Mode Key : Selects the Auto Size Mode.
2
Manual Staple Key : Staples copy sets or stacks already made.
3
Mixed Original Detection
Mode Key
: Sets the copier into the Mixed Original
Detection Mode.
4
Job Type Select Key II : Selects the type of copying job.
5
Job Type Select Key I : Selects the type of copying job.
6
Finishing Mode Select Key : Selects the type of exit processing.
7
File Margin Mode Key : Sets the copier into the File Margin Mode.
8
Cover Mode Key : Sets the copier into the Cover Mode.
9
Job Memory Select Key : Calls up a copying job program previously
stored in the program memory.
10
Job Memory Input Key : Stores a copying job program in the program
memory.
11
Drum Dehumidify Key : Starts the Drum Dehumidify Mode.
12
Auxiliary Toner
Replenishing Key
: Starts the Auxiliary Toner Replenishing
sequence.
13
Meter Count Key : Checks for each of the current counts of
different electronic counters of the copier.
G-13