NOTE: If a PF-101 (for Inch Areas) is being used, the PF-101 count is shown as the PF-201 3rd
Drawer count. No count is given for PF-201 4th Drawer.
•
PM Counter
The number set for the PM Counter is decreased by one each time a copy cycle is completed.
When the number reaches zero, the IU Service Life Indicator lights up, informing the user that
the copier requires maintenance services as scheduled.
After having counted down to zero, the PM Counter starts counting up.
•
Ports/Options Counters
Each of the Ports/Options Counters counts up the number of times a port or option has been
used, providing reference data for the Tech. Rep. during maintenance services.
Setting a PM Counter Count
(1) With the copier in the state ready to enter a particular Tech. Rep. Mode, press "4" to set the
copier into the Counters Mode and the PM Counter count appears across the Magnification
Ratio Indicator and Multi-Copy Display. (At this time, the IU Service Life Indicator lights up.)
(2) Press the Paper Select Key to obtain the count of each of the Ports/Options Counters. The
corresponding LED on the Monitor Display lights up when the count of that port or option is
shown. After all counts have been shown, the copier then accepts a new setting of the PM
Counter.
(3) Show the count of the PM Counter across the Magnification Ratio Indicator and Multi-Copy
Display and press the Clear Key. (Pressing the Stop Key immediately after the Clear Key has
been pressed will undo the clear command.)
(4) Using the Multi-Copy Keys, enter the new Counter count. (Any number consisting of up to
five digits can be entered.)
(5) Press the Start Key to validate the new count.
Clearing a Ports/Options Counter
•
Press the Paper Select Key as necessary to obtain the particular count to be cleared on the
Magnification Ratio Indicator and Multi-Copy Display. Then, press the Clear Key to clear the
count. Pressing the Stop Key immediately after the Clear Key has been pressed will undo the
clear operation.
1139S007AB
1139S008AB
Types of Counters and Display Order
Type Monitor Display
Magnification
Ratio Indicator
Multi-Copy
Display
9 ST-101 Stapler XXX XX
10 AF-3/AFR-7 XXX XX
S-15
To Next Page
Loading...
