5
USER’S CHOICE MODE
Types of User’s Choice Modes
Multi-Copy
Key
Mode Name
0 Mixed Original Detection
4 Lightweight Original
10
Paper size priority
Paper port priority
12 APS/AMS/Manual priority
13 Priority auto exposure level
14 Priority exposure mode/level
15 Finishing mode priority
Multi-Copy
Key
Mode Name
20 Auto clear ON/OFF
21 Energy Saving Mode ON timing
23 Auto clear for Plug-In Counter
24 Sort/Non-Sort switching ON/OFF
51 Special paper setting 1
52 Special paper setting 2
53 Special paper setting 3
54 Special paper setting 4
•
The User’s Choice Mode allows the user to program the copier (making priority and other
settings) according to his/her particular needs.
Setting Procedure
(1) Hold down the Panel Reset Key for 3 seconds to set the copier into the User’s Choice Mode.
(2) Press the Multi-Copy Key corresponding to the desired choice mode.
(3) Press the Start Key to validate the selection. At this time, the choice setting appears on the
Multi-Copy Display.
(4) To change the choice setting, first press the Clear Key to clear the current setting.
(5) Press the appropriate Multi-Copy Key or Keys to enter the new setting.
(6) Press the Start Key to validate the entry.
If the setting is illegal, it blinks on the Multi-Copy Display.
(7) Press the Panel Reset Key to leave the User’s Choice Mode.
S-29
To Next Page
Loading...
