Minolta EP1080 - Misfeed Detected When Copier Is Turned on

1-1. Misfeed Detected When Copier is Turned ON
1139T025AA
10 6 5 1
2
3
7
9
4
8
Procedure
1. Check for lit LED and remove a sheet
of paper if present at the LED location.
2. If an LED or LEDs light up again,
perform the following procedure.
Lit LED Paper Location Sensor Action
➀ ➁
Copier 1st/2nd
Drawer
1st Drawer Paper Take-Up
Sensor PC55
See step 10 on p. T-11
(Copier Take-Up Misfeed
Clearing Procedure).
2nd Drawer Paper Take-Up
Sensor PC56
See step 10 on p. T-11
(Copier Take-Up Misfeed
Clearing Procedure).
Transport Roller Transport Roller Sensor PC51 See step 14 on p. T-11
(Copier Take-Up Misfeed
Clearing Procedure).
➁ ➂
Vertical Transport
Section
Vertical Transport Detection
Sensor 3 PC17
See step 8 on p. T-31 (Duplex
Unit Take-Up Misfeed
Clearing Procedure).
Vertical Transport Detection
Sensor 4 PC22
See step 9 on p. T-15 (Paper
Feed Cabinet Take-Up
Misfeed Clearing Procedure).
➂
Paper Feed Cabinet
Take-Up Section
3rd Drawer Paper Take-Up
Detection Sensor PC21
See step 5 on p. T-13 (Paper
Feed Cabinet Take-Up
Misfeed Clearing Procedure).
4th Drawer Paper Take-Up
Detection Sensor PC29
See step 5 on p. T-13 (Paper
Feed Cabinet Take-Up
Misfeed Clearing Procedure).
Duplex Unit
Take-Up Section
Duplex Unit Paper Take-Up
Sensor PC16
See step 7 on p. T-31 (Duplex
Unit Take-Up Misfeed
Clearing Procedure).
➄
Synchronizing Roller Paper Leading Edge
Detecting Sensor PC54
See step 2 on p. T-19
(Transport/Separator Misfeed
Clearing Procedure).
T-6