Minolta EP1080 - Page 268

*
Copier/Paper Feed Cabinet (Option)
Code Description Possible Cause
C0400 Exposure Lamp’s failure
to turn ON
•
LA1 out
•
Defective PWB-A
•
Blown Exposure Lamp
Thermal Fuse TS2
•
Defective Power
Supply Unit PU1
•
Defective AE Sensor
C4100 Exposure Lamp turning
ON at abnormal timing
•
Defective PWB-A
•
Defective Power
Supply Unit PU1
•
Defective AE Sensor
C0500 Warming-up failure
•
Defective PWB-A
•
Defective Fusing
Thermal Fuse TF1
•
Defective Fusing
Thermistor TH1
•
Defective SSR
•
Fusing Heater Lamp H1 out
C0510 Abnormally low fusing
temperature
•
Defective PWB-A
•
Defective Fusing
Thermal Fuse TF1
•
Defective Fusing
Thermistor TH1
•
Defective SSR
•
Fusing Heater Lamp H1 out
C0520 Abnormally high fusing
temperature
•
Defective PWB-A
•
Defective SSR
•
Defective Fusing Thermistor TH1
C0600 Scanner Motor malfunction
•
Defective Scanner Motor M5
•
Defective Scanner Reference Position Sensor
PC81
•
Defective Motor Drive Board PWB-E
•
Defective PWB-A
C0610 Lens Motor malfunction
•
Defective Lens Motor M6
•
Defective Lens Reference Position Sensor PC90
•
Defective Motor Drive Board PWB-E
•
Defective PWB-A
C0620 Mirror Motor malfunction
•
Defective Mirror Motor M7
•
Defective Mirror Reference Position Sensor PC86
•
Defective Motor Drive Board PWB-E
•
Defective PWB-A
Exposure LampFusing Unit
Optical Section
T-36