Minolta EP1080 - Page 33

PC Drive Motor M1
Start Key ON
ON
ON
Main Erase Lamp LA2
Main Drive Motor M2
ON
D The Start Key is pressed.
ON
Unexposed Areas/Edge Erase Lamp LA3
*
All LEDs are turned ON.
ON
Developing Bias (High Voltage Unit HV1)
ON
Paper Separator Corona (HV1)
ON
Cleaning Bias (HV1)
*
Some models have no Bias Seal installed depending
on their marketing areas.
1st/2nd Drawer Paper Take-Up Solenoid SL2/SL3 ON
Approx.
400
ON
1st/2nd Drawer Paper Take-Up Sensor PC55/PC56
Approx. 300
ON
Paper Take-Up Roll (1st/2nd Drawer Paper
Take-Up Solenoid SL2/SL3)
Approx. 100
OFF
SL2/SL3
Approx. 200
ON
PC Drum Charge Corona/Image Transfer
Corona (HV1)
Approx. 500
OFF
Synchronizing Roller (Synchronizing Roller
Clutch CL1)
Approx. 200
ON
Transport Roller (Paper Transport Clutch CL2)
E Paper is taken up.
1st Drawer:
Approx. 700
2nd Drawer:
Approx. 1,420
ON
Transport Roller Sensor PC51
Approx.
560
ON
Paper Leading Edge
Detecting Sensor PC54
Approx.
230
OFF
Paper
Transport
Clutch CL2
➀
Approx.
380
ON
Exposure Lamp LA1
M-7