6-2. Toner Recycling
The copier is provided with a toner recycling mechanism.
The toner, which has been scraped off the surface of the PC Drum by the
Cleaning Blade and collected in the Cleaning Unit, is conveyed by the two
Toner Recycling Coils to the Toner Supply Port and, from there, it is
returned back to the Developer Mixing Chamber of the Developing Unit.
One of the gears of the Toner Recycling mechanism receives drive through
a gear at the rear end of the PC Drum.
Toner Supply Port
Toner Recycling Coil
Bevel Gears
Toner Recycling Coil
Toner Recycling Path
M-13
To Next Page
Loading...
