12
OPTICAL SECTION
As the Scanner is moved by Scanner Motor M5, the light from Exposure
Lamp LA1 is reflected off the original and guided through the four Mirrors
onto the surface of the PC Drum to form the electrostatic latent image.
The image is enlarged or reduced as necessary by changing the position of
the Lens and 4th Mirror and varying the angle of the 4th Mirror.
4th Mirror
Mirror Motor M7 Scanner
Lens Motor M6
AE Sensor
2nd/3rd Mirrors
Carriage
Lens
Scanner Shaft
Scanner Motor M5
M-34
To Next Page
Loading...
